TS75

● Metal test: 15mm diameter steel tube,24mm depth
● The LED will light and beep sounds whenever the detector detects metal or voltage
● Voltage mode: AC 100V electric wire(30mm depth) AC 220V electric wire(40mm depth)
● Operation Condition: -7~40 °C below 75% RH.
● Storage Condition: -20~50 °C below 85% RH.
● Battery: 9V (6F22)*1
● Dimension: 148L*82W*25H(mm)
● Weight: 142g (including battery)

TS80

● Sensitivity: (25 cents(USD)) 60mm; (Iron pipe-tube) 120mm
● Operating current: <20mA
● Operation Condition: -10~50 °C below 75% RH.
● Battery: 9V (6F22)*1
● Dimension: Φ135mm
● Weight: 230g (including battery)

WPP123

● Avoids drilling or cutting into unseen hazards in walls,floors and cellings.
● Electronically locates cables,gas and water pipes,electronic conduits and steel joists.
● Detects mains power and traces breaks in circuits and cables.
● Audio and visual indicator system with battery low warning light.
● DMetal test: 15mm diameter steel tube,24mm depth
● WVoltage mode: AC 100V electric wire(40mm depth)

JDT-03

● Utilizing the procedure of scanning and marking from two sides, the product will find the center of wood or metal studs or live wires through 3/4 inch surfaces within 1/8 inch accuracy.
● Battery Life: 1 year with normal use
● Water Resistance: Water resistant, but not waterproof.
● Operating Temperature: +20°F to+120°F(-7°C to+49°C)
● Storage Temperature: -20°F to +150°F(-29°C to+66°C)

JDT-02A Stud Detector

● Dimensions: 150*70*35mm
● Weight(without battery): 200g
● Battery type: 9-V alkaline(not included)
● Position accuracy: Stud Scan mode: typically with 1/8 in.(3mm)using the dual Scan and mark procedure
● Depth: Up to 3/4 in.(19mm) in Stud Scan mode
● Operating temperature: 20 ° to 120 °F (-7 ° to 49 °C)
● Storage temp: -20 ° to 150 °F (-29 ° to 66 °C)
● Humidity: 80%RH(con-condensing)
● Splash and water resistant, not waterproof

JDT-01

● Battery type: 9-V alkaline(not included)
● Position accuracy: Stud Scan mode: typically with 1/8 in.(3mm)using the dual Scan and mark procedure
● Depth: Up to 3/4 in.(19mm) in Stud Scan mode
● Operating temperature: 20 ° to 120 °F (-7 ° to 49 °C)
● Storage temp: -20 ° to 150 °F (-29 ° to 66 °C)
● Humidity: 80%RH(con-condensing)
● Splash and water resistant, not waterproof

TS130

● Check in custom and check for safe
● Search the underground golden and silvern treasure besides underground metal cultural relic
● DArchaeological studies and detect mineral
● Detect the underground pipe and cable
● Detect the metal object in post and baggage
● Detect metal object in material, fuel and food
● Be used by police for detection

LCD Walk-Through

● LCD display
● Designed in modularization
● Detect all kinds of metal, including stainless steel, iron, manganese, zinc, alloy, etc.
● Composite circuit design. uses infrared and has strong immunity against disturbance.
● The level indicator on the function responds according to the size of the detected metallic object.
● Outer frame：216cmX82cmX50cm
● Inner frame：200cm(H)X60cm(W)X50cm

MD3003B1

● Red LED Indicator lights when the Metal Detector detects metal
● Earphone Jack lets you connect an optional earphone to the security wand so you can scan in privacy
● Sensitivity:A 25-cent coin: 2.5 inch(0.6 inch)
● Iron pipe-tube in ?20mm: 4 inch(1.2 inch)
● Adjustment:Continuous
● Alert:Audio, LED light, Vibration(for TS90A)
● Power:9V battery (6F22)
● Dimensions(W×L×T):80×420×40 mm
● Weight:430g (with battery)

TC91

● Check in custom and check for safe
● Search the underground golden and silvern treasure besides underground metal cultural relic
● Archaeological studies and detect mineral
● Detect the underground pipe and cable
● Detect the metal object in post and baggage
● Detect metal object in material, fuel and food
● Be used by police for detection