 |
TS75 Metal/ Voltage Detector |
|
¡ñ Metal test: 15mm diameter steel tube,24mm depth
¡ñ The LED will light and beep sounds whenever the detector detects metal or voltage
¡ñ Voltage mode: AC 100V electric wire(30mm depth)
AC 220V electric wire(40mm depth)
¡ñ Operation Condition: -7~40 °C below 75% RH.
¡ñ Storage Condition: -20~50 °C below 85% RH.
¡ñ Battery: 9V (6F22)*1
¡ñ Dimension: 148L*82W*25H(mm)
¡ñ Weight: 142g (including battery) |
|
|
TS80 Metal Detector |
|
¡ñ Sensitivity: A25-cent coin: 65mm
Iron pipe-tube in ¦µ20mm: 120mm
¡ñ Temperature environment: -10°C~50°C
¡ñ Operating current: <8mA
¡ñ Operating Frequency: 25KHz
¡ñ Tuning: Automatic
¡ñ Alert: Audio
¡ñ Power: 6F22 9V*1
¡ñ Dimension: 392mm(Operation); 258mm(storage)
¡ñ Weight: 230g (without battery) |
|
|
WPP123 Wire-Pipe-Power Detector |
|
¡ñ Avoids drilling or cutting into unseen hazards in walls,floors and ceilings.
¡ñ Electronically locates cables, gas and water pipes, electric conduits and steel joists.
¡ñ Detects mains power and traces breaks in circuits and cables.
¡ñ Audio and visual indicator system with battery low warning light.
¡ñ Dimension: 150L*40W*80H(mm)
¡ñ Weight: 110g (without battery) |
|
 |
JDT-03 3 in 1 Metal/ Voltage/ Stud Detector |
|
¡¡Utilizing the procedure of scanning and marking from two sides, the product will find the center of wood or metal studs or live wires through 3/4 inch surfaces within 1/8 inch accuracy.
¡ñ Battery Life: 1 year with normal use
¡ñ Water Resistance: Water resistant, but not waterproof.
¡ñ Operating Temperature:
+20degreesF to+120degreesF(-7degreesC to+49degreesC)
¡ñ Storage Temperature:
-20degreesF to +150degreesF(-29degressC to+66degreesC) |
|
 |
JDT-02A Stud Detector |
|
¡ñ Dimensions: 150*70*35mm
¡ñ Weight(without battery): 200g
¡ñ Battery type: 9-V alkaline(not included)
¡ñ Position accuracy: Stud Scan mode: typically with 1/8 in.(3mm)using the dual Scan and mark procedure
¡ñ Depth: Up to 3/4 in.(19mm) in Stud Scan mode
¡ñ Operating temperature: 20 ° to 120 ¨H (-7 ° to 49 ¡æ)
¡ñ Storage temp: -20 ° to 150 ¨H (-29 ° to 66 ¡æ)
¡ñ Humidity: 80%RH(con-condensing)
¡ñ Splash and water resistant, not waterproof |
|
 |
| JDT-01 Metal/Voltage Detector |
|
¡ñ Battery type: 9-V alkaline(not included)
¡ñ Position accuracy: Stud Scan mode: typically with 1/8 in.(3mm)using the dual Scan and mark procedure
¡ñ Depth: Up to 3/4 in.(19mm) in Stud Scan mode
¡ñ Operating temperature: 20 ° to 120 ¨H (-7 ° to 49 ¡æ)
¡ñ Storage temp: -20 ° to 150 ¨H (-29 ° to 66 ¡æ)
¡ñ Humidity: 80%RH(con-condensing)
¡ñ Splash and water resistant, not waterproof |
|
